Shower Installation Services

To install a new shower cabin, it is necessary to dismantle the old one. This procedure is not very difficult; however, it requires the necessary skills and abilities. The manipulation consists of the following actions: disconnecting the equipment from the network, stopping the water supply and disconnecting the hoses, removing all the polos, mixers, dispensers, etc., inside the cabin, removing the sealed layer, and removing the doors, profiles, walls, tray, and podium. 

Now, let’s figure out what stages the installation of a shower cabin consists of. 

• Stage 1: Installing the shower tray on a flat surface. A drain is installed to the bottom valve, the sealant is fixed, and a leak test is carried out. It is essential to do all the work slowly, step by step. This will allow you to do everything as accurately as possible and will guarantee the reliability of the assembled device. 
• The next stage is connecting water to the shower cabin. This can be done in two ways: from the toilet or from under the sink. To organize the drain, you will need a pipe with a natural slope. 
• It is also very important to make the correct connection to the network. For this task, a three-core cable is used. Insulating the wires and sockets guarantees safety for the life and health of the owner and his loved ones. Sockets should be no closer than 80 cm from the shower cabin. 
• Next, need to check the water circulation and test the operability of the equipment. 

Beautiful and functional shower cabins have become integral to modern housing. Despite the most delicate use, the drainage and water supply systems sometimes fail. Periodically, the wheels break, or the tray starts to leak.

In this case, you cannot do without calling a plumbing service to repair the shower cabin.

Our company offers to arrange a call to a specialist to any point in New Jersey. The cost of the work depends on the specific tasks, which the master will report after diagnostics.

Modern shower cabins are complex devices with many functions, among the main ones: decorative and central lighting, radio, hydro massage, MP3, overhead shower, hand shower, water spout into the shower tray, etc. Like any device, a shower cabin requires repair from time to time. A malfunction of the electric or water supply system is fraught with an electric shock or flooding of neighbors. Therefore, you should not delay with repairs.

Is your morning shower not as refreshing as it used to be? It may be time to consider a new shower head. Let’s look at the signs that signal the need for a new, effective shower head. 

Nasty water leaks in your bathroom can be a big problem, causing damage to your property and increasing your water bill. Leaks from the shower head alone can waste hundreds of gallons of water daily, leading to higher costs and potential mold growth. 

Loose or rusty bolts on older shower heads or poor-quality new ones often cause these leaks. If you notice leaks, it may be time to repair or upgrade your shower head, a small change that can make a big difference to your home and wallet. 

Did you know that the water in your shower isn’t just water? It contains natural minerals and treatment chemicals that can build up in your shower head over time, causing clogs. These deposits, often made from minerals like lime and calcium, can disrupt the water flow and change the pH, affecting your skin and hair. 

While a thorough cleaning can remove minor buildup, significant buildup may require a complete showerhead replacement. Always maintain your showerhead to maintain optimal pressure and water quality, and consider cleaning the drains for a clean space from top to bottom. 

Your bathroom, as a hub of moisture and heat, is a magnet for mold and mildew, especially around the shower area. This can lead to health issues and negatively impact your skin and hair. 

If cleaning doesn’t solve the problem, it may be time for a new, dirt-filtering showerhead. Consider replacing any mold-infested bathroom accessories or installing a new showerhead for a healthier, fresher shower. 

Imagine you’re in the shower, and the water pressure starts to get out of control. Not only is it annoying, but it can also be dangerous. A sudden burst of water can surprise you and potentially damage sensitive skin, such as that of children or pets. Or parts of the shower can come loose and damage the floor or even you. 

Our team of experienced plumbers offers reliable shower installation services to homeowners in New Jersey. If you notice that your water pressure has become erratic or so low that your shower barely works, it’s probably time to replace it. Don’t tolerate a substandard shower. Consider purchasing a new shower head to bring back the joy of a great shower. 

Water is precious, and we need to use it wisely. If your shower head uses more water than it should, it may be time for a change. Traditional shower heads can use much water without creating a huge amount of pressure or flow. 

Some options provide a strong flow while still conserving water. Our team of licensed plumbers specializes in installing shower heads and accessories, with sustainability and water conservation as a top priority. You can enjoy a great shower while taking care of our planet. 

Here are five main types of shower heads we use.

Fixed shower heads are a standard design found in many homes. Installed directly onto a shower rail that extends out of the wall or ceiling, they offer a simple and traditional showering solution. Their simplicity makes them popular for those who prefer a fuss-free shower experience. 

Rain shower heads are designed to mimic the feeling of standing under a soft rain shower. They are typically larger and mounted either on the ceiling or high on the wall to ensure that the water falls evenly across the body. The wide spray pattern provides a calm, soothing experience often associated with luxury spas. These shower heads prioritize relaxation over high-pressure jets. 

Handheld shower heads attach to a flexible hose, allowing users to direct the flow of water exactly where they want it. This flexibility makes them incredibly versatile for tasks beyond the standard shower, such as thoroughly rinsing hair, cleaning the shower stall, or bathing children and pets. They often come with a mounting bracket or rail, allowing them to function as a fixed shower head if desired. 

Dual shower heads combine the functionality of fixed and handheld shower heads into one unit. This design provides the convenience of a fixed shower head with the flexibility of a handheld component. Users can operate both heads simultaneously or switch between them, providing a customized shower experience. This combination provides improved coverage and can enhance the overall shower experience. 

Filtered shower heads feature built-in filters that remove impurities such as chlorine, heavy metals, and sediment from the water. Improving water quality benefits, the health of the skin and hair by reducing dryness and irritation. These shower heads are especially useful in areas with hard water or high levels of water treatment chemicals. 

Why it is better to trust our experts with the repair and installation of shower cabins:

• Diagnostics. Experienced shower installers near me will diagnose a broken shower cabin and accurately identify the breakdown. The inspection can also indicate weak points in advance and allow you to replace them with losses.
• Consultation. Plumbers will be happy to give a reasoned answer to all your questions regarding the shower cabin.
• Qualified repair. The company has both plumbing and electricians on staff. This is an essential nuance since modern shower cabins are often equipped with electrical equipment.
• Selecting parts. Our plumber replaces failed parts with original or similar ones. You do not need to understand the parameters of fastening systems or rollers and look for the appropriate part in building materials stores.

If you also consider flexible prices, provided documentation, and a wide range of services, then the choice becomes obvious.